Pioneer DEH-P4200UB Mode D'emploi page 33

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Additional Information
No songs
NO AUDIO
The connected
USB storage de-
vice has security
enabled
SKIPPED
The connected
USB storage de-
vice contains
WMA files em-
bedded with
Windows Med-
iaä DRM 9/10
PROTECT
All the files in the
USB storage de-
vice are em-
bedded with
Windows Media
DRM 9/10
CHECK USB
The USB connec-
tor or USB cable
has short-
circuited.
The connected
USB storage de-
vice consumes
more than 500
mA (maximum
allowable cur-
rent).
NOT COMPA-
Not compatible
TIBLE
USB device
ERROR-19
Communication
failure
Transfer the audio
files to the USB
storage device and
connect.
Follow the USB
storage device in-
structions to dis-
able the security.
Play an audio file
not embedded with
Windows Media
DRM 9/10.
Transfer audio files
not embedded with
Windows Media
DRM 9/10 to the
USB storage de-
vice and connect.
Check that the
USB connector or
USB cable is not
caught in some-
thing or damaged.
Disconnect the
USB storage de-
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only com-
pliant USB storage
devices.
Disconnect your
device and replace
it with a compati-
ble USB storage
device.
Perform one of the
following opera-
tions.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to the
USB source.
USB storage de-
vice is not for-
ERROR-23
matted with
FAT12, FAT16 or
FAT32
iPod
Message
Cause
NO DEVICE
When plug and
play is off, no
USB storage de-
vice or iPod is
connected.
FORMAT
There is some-
READ
times a delay be-
tween the start of
playback and
when you start to
hear any sound
ERROR-19
Communication
failure
iPod failure
ERROR-16
Old iPod firm-
ware versions
iPod failure
N/A USB
Not compatible
iPod
Appendix
USB storage de-
vice should be for-
matted with FAT12,
FAT16 or FAT32.
Action
! Turn the plug
and play on.
! Connect a com-
patible iPod.
Wait until the mes-
sage disappears
and you hear
sound.
Disconnect the
cable from iPod.
Once iPod's main
menu is displayed,
reconnect cable.
Reset the iPod.
Disconnect the
cable from iPod.
Once iPod's main
menu is displayed,
reconnect cable.
Reset the iPod.
Update the iPod
version.
Disconnect the
cable from iPod.
Once iPod's main
menu is displayed,
reconnect cable.
Reset the iPod.
Disconnect your
device and replace
it with a compati-
ble iPod.
33
En

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Leica

Table des Matières