How to Brew a Single-
Serve Pack
w WARNING
Burn Hazard. To avoid contact with hot coffee or
water:
• Do not fill water above MAX fill line (10 ounces [296 ml]).
• Fill reservoir with cup of water into which the coffee will be
brewed.
• Fully insert cup under brew basket.
• For best results, use K-Cup
w CAUTION
Cut Hazard. Removable single-serve pack holder
has a sharp blade. Use caution when handling.
NOTE:
It can take up to 2 minutes before brewed coffee starts dispensing
into your cup. Total brew time average is 4 minutes. For best
results, allow the coffee maker to cool for at least 2 minutes
between brewing cycles.
Plug in unit and slide out the brew basket. Place a pack into the
single-serve pack holder. Press down on the edge of the pack until
the pack snaps into place and hole is punched in the bottom. Do
not remove foil. Slide brew basket back into unit. Press down on
brew basket handle to lock and puncture the foil lid on the pack.
* K-Cup is a registered trademark of Keurig, Inc. Use of the K-Cup trademark
does not imply any affiliation with or endorsement by Keurig, Inc.
®
* packs.
6