LENCO PR2700 Mode D'emploi page 27

3. Retrieving the preset stations press Memory to access a preset station.
RDS information display
The Radio Data System (RDS) is a broadcasting service which allows stations to send additional information
along with the regular radio programmed signal. (RDS works on the in FM waveband only).
Tune to an FM RDS station, The Programmed Service name (station's name) appears on the display.
1.
2. Each time the RDS button is pressed, the RDS mode is changed as PS (Programmed Service name) → PTY
(Programmed Type) → RT (Radio Text)
Remark:
1. PS (Programmed Service name):When you select PS, the frequency will be displayed for 3 seconds, and then
PS (station's name) will be displayed. If there is no PS data, "NO PS" will be displayed.
2. PTY (Programmed Type): When you select PTY, the programmed type will be displayed. If there is no PTY
data, "NO PTY" will be displayed.
3. RT (Radio Text): When you select RT, the new of stations composed of up to 64 symbols will be displayed. If
there is no RT data, "NO RT" will be displayed.
4. Icon The blinking clock on the RDS symbol means that The time is automatically updated each time it
blinks.
10. USING AN USB STICK
PLAY
1. Press the FUNCTION button until display Show USB.
2. Press PLAY to pause the playback, press it again to resume playback.
3. Using the buttons SKIP+/SKIP- to select next or previous track.
4. Press and hold SKIP+/SKIP- to
Programming
The device allow you to create a playlist of up to 20 tracks.
1. When USB playback is stopped press the MEMORY/ALARM button. The display memory location flashes P01
2. When the playback stops, press the button Memory, The display flashes memory and P01 Appears.
Fast forward/backward. When released normal playback will resume.
27