Carrier RG67V/BGEF Manuel Du Propriétaire page 9

Press this button under COOL or HEAT operating Mode
Follow
Follow
Me
Me
or
Smart
eye
Press this button to activate Follow me. This function can
adjust room temperature base on the controller's sensor
and make you comfort.
Note:Please put the controller in the location where can
ensure the indoor unit can receive the signal.
Press LED button
LED
LED
or
Fresh
Press this button to turn on and turn off the display on the
indoor unit.
Press this button
High
Power
High
Power
(Turbo)
or
Self
Clean
Press this button to activate High Power (Turbo) feature.
It enables the unit to reach the set temperature in
the shortest time. Press it again to disable it. (Model
dependent)
The controller will display
the actual temp. at its
location and send this
signal to indoor unit every
3 minutes
The unit will operate at the
biggest capacity output to
reach the setting Temp.
quickly.
Press this button more than 2 seconds
2s
Follow
The smart eye feature is
Me
energized.
Keep pressing this button more than 2 seconds, the
smart eye function is activated and will detects the
people activities in the room. (Model dependent)
Press this button more than 2 seconds
2s
The ionizer or Plasma
LED
dust collector (model
dependent) is energized.
Keep pressing this button more than 2 seconds, the
fresh function is activated and will help to remove
pollen and impurities from the air. (Model dependent)
Press this button under COOL or DRY Mode more
than 2 seconds
2s
The unit will enter low
fan mode to dry up the
High
coil. The cleaning cycle
Power
takes 15~30 mins, after
which the unit will turn off
automatically.
Keep pressing this button more than 2 seconds, the
unit will clean itself to avoid bacteria grow around heat
exchanger. (Model dependent)
08