CLAS B.LINE EQ 0600BL Manuel D'utilisation page 26

EQ 0600BL
Button function
It includes single button operation and combination key operation. Single button operation:
decrease the value
FINE: Display the practical unbalance value.
ABD: shift the wheel parameter
ALU: balance mode selection
STOP: stop or cancel
FINE + = shift the unit g & oz
FINE + ALU: enter the scale calibration function
FINE + STOP: enter system setting manu
ABD+
: enter sensor test function
BALANCE OPERATION
This machine has 6 kinds of dynamic balance mode and one static balance mode accordi ng to the
position to apply weight on the rim:
MANUAL MOTORIZED WHEEL BALANCER LED
SCREEN
DYN: clamp the weight on both
edge of rim.
ALU1: stick the weight on the
plane inside of spokes.
ALU2: stick the weight on the
plane inside and outside of
spokes.
ALU3: stick the weight on the
plane inside of spokes and
clamp the weight outside.
ALU4: stick the weight on the
plane outside and clamp the
weight outside of the spokes
ALU5: stick the weight on the
plane out side and clamp the
weight in side.
STA: static balance mode.
increase the value
START: start or confi rm
Combication key operation: FINE
ABD: enter the 100g calibration
FINE + = shift the unit mm & inch