Using Digital Multimedia Connectors; Usb Memory Connection; Connecting The Lcd Tv To A Pc; Using Side Av Connectors - AYA A26CC2601 Mode D'emploi

Using Digital Multimedia
Connectors
• You can connect USB devices to your TV by using
the USB input of the TV. This feature allows you to
display/play JPG, MP3 and video fi les stored in a
USB stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
• You may back up your fi les before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any fi le damage or data loss.
• Do not pull out USB module while playing a fi le.
CAUTION: Quickly plugging and unplugging USB
devices, is a very hazardous operation. Especially,
do not repeatedly quickly plug and unplug the
drive. This may cause physical damage to the USB
player and especially the USB device itself.
SIDE VIEW
USB
5Vdc
Max:500mA

USB Memory Connection

IMPORTANT: The TV should be switched off while
plugging or unplugging a USB device. Plug your
USB devices to the USB input of the TV. You can
connect a usb device to your TV by using the USB
input of the TV.
Note: It is possible certain types of hard disk drives
are not supported.
A02_MB60_[GB]_5100UK_IDTV_NICKEL16_woypbpr_26843W_10069735_50175394.indd 40 A02_MB60_[GB]_5100UK_IDTV_NICKEL16_woypbpr_26843W_10069735_50175394.indd 40
USB MEMORY
English - 40 -
Connecting the LCD TV to a
PC
For displaying your computer's screen image on your
LCD TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use 15-pin D-sub display cable to
connect a PC to the LCD TV. When the connection
is made, switch to PC source. See "Input selection"
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix parts.

Using Side AV Connectors

You can connect a range of optional equipment to
your LCD TV..
• For connecting a camcorder, connect to the S-VIDEO
or VIDEO IN socket and the AUDIO SOCKETS. Do
not connect the camcoder to S-VIDEO and VIDEO
IN socket at the same time since it can cause noise
in the picture. For selecting the related source, see
the section "Input selection" in the following parts.
• To listen the TV sound from headphones, connect
to the HEADPHONE jack of theTV.

Connecting to a DVD Player via HDMI

Please refer to your DVD player's instruction book
for additional information. Power off both the TV and
the device before making any connections.
Note: Not all cables shown in the illustration are
supplied.
• If your DVD player has an
connect via HDMI for better video and audio quality.
HDMI socket, you can
21.09.2010 10:55:55 21.09.2010 10:55:55