Harvia Sentio Concept R mini combi CP-RMC-35 Instructions D'installation Et Mode D'emploi page 56

Installation instructions, for professionals only
7. Screw the side panel F of the wood railing flush with the side panel G of the
bracket. If necessary, repeat this procedure on the opposite side.
8. Connect the side panel G of the bracket to the long bracket panel I with
the help of the corner bracket H. If necessary, repeat this procedure on the
opposite side.
9. Screw the long wooden railing panel K and the short wooden railing panel L to
the bracket panel I. Make sure that it is flush with the side panel F of the
wood railing.
10. Place the assembled heater railing on the railing bracket and affix it with the
supplied rounded head screws. Thread the heater railing carefully over the
cover to avoid scratching the surface.
p. 22/34