Control - JSF ECS 750 MK2 Manuel D'utilisation

– 20.000 pps are the minimum, exclusively for beam show.
– 30.000 pps allow simple graphics, beam shows, text and a dozen symbols.
– 40.000 pps allow complicated graphics, logos and long text ...
10.6 Control
Auto/Sound:
To Avoid! It is not recommended to use the laser in this mode.
DMX:
Easy to use but very limited possibilities, especially on a multicolored laser. It
often has only 7 colors because the type of modulation is mostly TTL and the
galvo is limited to 12.000pps.
ILDA:
Gives you a wide variety of possibilities and a lot of freedom! ILDA uses a sub
D 25 connector (like used in older printers). The maximum length is 50m. It
must be used on an interface along with the right software. There are many on
the market, Pangolin QuickShow is particulary recommended because its both,
powerful and easy to use.
29
english