Yamaha TT-R125P Manuel D'atelier Du Proprietaire page 39

Part number
YM-1312-A, 90890-01312 Fuel level gauge
This gauge is used to measure the fuel level in the
float chamber.
YU-33270-B, 90890-01362 Flywheel puller
This tool is used to remove the rotor.
YM-33963, 90890-01367 Fork seal driver weight
YM-33281, 90890-01400 Fork seal driver attachment
These tools are used to installing the fork oil seal.
YU-33975, 90890-01403 Steering nut wrench
This tool is used when tighten the steering ring nut to
specification.
YS-1880-A, 90890-01701 Sheave holder
This tool is used for when loosening or tightening the
flywheel magneto securing nut.
YU-3112-C, 90890-03112 Pocket tester
Use this tool to inspect the coil resistance, output
voltage and amperage.
YU-8036-B Inductive tachometer
90890-03113 Engine tachometer
This tool is needed for observing engine rpm.
YM-4019, 90890-04019 Valve spring compressor
This tool is needed to remove and install the valve
assemblies.
YM-91042, 90890-04086 Clutch holding tool
This tool is used to hold the clutch when removing or
installing the clutch boss securing nut.
All manuals and user guides at all-guides.com
Tool name/How to use
1 - 7
SPECIAL TOOLS
Illustration
YM-1312-A
YU-33270-B
YM-33963
YM-33281
YU-33975
YS-1880-A
YU-3112-C
YU-8036-B
YM-4019
YM-91042
GEN
INFO
90890-01312
90890-01362
90890-01367
90890-01400
90890-01403
90890-01701
90890-03112
90890-03113
90890-04019
90890-04086