Wellcare WE-167FWH Mode D'emploi page 13

APS (Active Protection System) – 3-Color LED
This product is equipped with APS (Active
Protection System) (3) technology which detects
errors on the operation or component failures. By
the 3-color LEDs which can be seen from both sides
of the controller (2), APS can help you to operate
the foot warmer easily and safely.
Green – The product has reached the desired
temperature level.
Orange – The product is heating up to reach the
desired temperature level.
Due to the temperature variation in different
environments (room, bed, etc.), APS LED may
change between green and orange colors
within seconds which indicates continuous
heating when the product is in use. Under
this circumstance, please note the product is
functioning properly and normally.
Red light – Possible malfunction or overheating,
switch off the appliance immediately.
In the following situations, the red light will come on
to indicate warning:
When the critical components are damaged:
•
Please disconnect the mains cable from wall
outlet immediately.
When the heating wires or other components
•
are broken and the device cannot work anymore.
The warnings mentioned above cannot cover
all defective situations as the damages on some
GB
13