Installation; Connection Cable; Before The Installation - Zanker Kev6446Xxk Notice D'utilisation

Installation

Warning! Refer to Safety chapters.

Before the installation

Before you install the hob, write down the information
bellow from the rating plate. The rating plate is on the
bottom of the hob.
Serial number ...........................
Built-in hobs
Only use the built-in hobs after you assemble the hob
into correct built-in units and work surfaces that align to
the standards.
Assembly
min.
500mm
24
min.
50mm

Connection cable

• The hob is supplied with a connection cable.
• To replace the damaged mains cable use the
following (or higher) mains cable type: H05BB-F
Tmax 90°C. Speak to your local Service Centre.
R 5mm
+1
490 mm
min.
55mm
+1
560 mm