Assembly Zi-Grm1100 And Zi-Grm1650 - Zipper Maschinen ZI-GRM400 Manuel D'utilisation

12.2 Assembly ZI-GRM1100 and ZI-GRM1650

ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-GRM400 | ZI-GRM1100 | ZI-GRM1650
6. Insert the key into the drive shaft.
7. Lubricate motor shaft.
Align keyway in finger plate with
key in shaft and push down into
place.
8. Assemble M8 bolt, M8 lock washer
and 8 mm domed spacer over
shaft. Tighten with 13 mm
wrench.
9. Place tub in feather pan.
NOTE: The magnetic read switch
in the feather pan must be aligned
with the magnet in the tub. Align
arrow label on tub to arrow on
feather pan (note the marking).
10. Fix the drum with the quick-
release fasteners.s
It is recommended that you attach
a valve to the tub.
1. Unpack the machine (FIGURE 1)
ASSEMBLY
24