Assembly With Trolley Base; Water Tank Assembly; Secure Handle; Attach Spray Gun Holder - Zipper Maschinen ZI-DS2V-AKKU Mode D'emploi

12 ASSEMBLY

Assembly with Trolley Base

12.1.1 Water tank assembly :

Place the water tank on the trolley base
(take care to have the right orientation of
the tank, fixation bore towards the trolley
base)
Attach the bracket by turning the
screw counterclockwise tank.

12.1.2 Secure handle:

Loose the nut.
Slide the handle on the metal pipe.
The locking pin has to be inserted into the bore of
the metal pipe.
Turn the nut clockwise.

12.1.3 Attach spray gun holder

Put the gun holder on the metal pipe.

12.1.4 Install metal pipe to trolley base

Loosen the nut. Insert the
metal pipe to the base trolley.
Adjust the height and secure
with locking pin. For fixation
turn the nut clockwise.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-DS2V-AKKU 20
adjust height
ASSEMBLY
20