Usb Connection; Antenna Connection - Came Rbe4230 Manuel D'installation

Before fi tting any plug-in card, such as the AF or R800 one, YOU MUST CUT OFF THE MAINS POWER SUPPLY
and, if present, disconnect any batteries.
 Once the code-copying procedure is completed, the Memory Roll card must be removed.
CRP connection with RSE card
UTP CAT5 cable
A <—> A
B <—> B
GND <—> GND
*To verify compatibility, go to:

USB connection

Connect to the AB-type, mini-USB on the PC, to access to the free, RBE* software advanced functions. You can fi nd
these at:
* compatible with control card fi rmware as of the 2.0 version; the one with the H1 function.

Antenna connection

Fit the RSE card.
Connect to a CAME device running the CRP*
(CameConnect System), as illustrated for the RS485 connection
cable not supplied
Connect the coaxial cable and antenna brace as shown.
Cable
Sleeve