System Requirements; Frequently Asked Questions - i-tec MWBT245 Mode D'emploi

DESCRIPTION OF KEYS AND DPI ADJUSTMENT:
• Optical sensor sensitivity can be adjusted in two steps, i.e. 1000 / 1600 DPI, by
pressing and holding the DPI button.
• You can open your internet browser by pressing the DPI button. This function is only
available in Windows operation systems.
• Two buttons on the left side of the mouse are intended for movements "forwards"
and "backwards" , allowing easy navigation in the documents on the internet pages.
This function is only available in Windows operation system.
Top view
1. DPI button (speed)
2. Scroll wheel and middle mouse button
3. Right mouse button
4. Left mouse button
5. Navigation button for quickly mouse
movement forwards and backwards (only
in Windows)
Bottom view
6. On / Off switch
7. Optical sensor
8. Battery compartment

SYSTEM REQUIREMENTS:

Hardware:
Any hardware with Bluetooth 4.0 technology. Bluetooth Dongle is not included in this
product.
Operation system:
Windows 8 / 8.1 / 10, macOS, Android
Notice: Do not use the mouse on the reflective surface, such as glass or mirror. Please
avoid using the mouse under the following conditions:
• Direct sunlight
• Extreme hot, cold, dusty or magnetic environment
• Near by fax machine, television, radio, mobile phone or any wireless device
• Please do not repair unfunctional mouse yourselves, you should find authorized
technical support.

FREQUENTLY ASKED QUESTIONS

Available on our website www.i-tec.cz/en on the "FAQ" tab of this product.
Quick Start
| 7
ENGLISH