Table des Matières
Publicité
Pile
Height Control
Réglage
de la hauteur
Selección de
ajuste de altura
Handle Adjustments
Suggested Pile Height Settings
➢ To lower wands, hold POWER NOZZLE
down with foot and pull back on wands.
➢ Select a pile height setting by rotating
the pile height control. The pile height
setting is shown on the control.
➢ For best deep down cleaning, use the
LO setting. However, you may need to
raise the height to make some jobs
easier, such as scatter rugs and some
deep pile carpets, and to prevent the
vacuum cleaner from shutting off.
Suggested settings are:
➢ HI – Shag, deep pile, or scatter rugs.
➢ MED – Medium to deep pile.
➢ LO – Low to medium pile.
CAUTION
DO NOT leave the POWER NOZZLE
running in one spot in the upright
position for any length of time. Damage
to carpet may occur.
- 26 -
Publicité
Table des Matières
