Table des Matières
Publicité
➢ ➢ This vacuum cleaner has a thermal protector which automatically trips to protect the
vacuum cleaner from overheating. If a clog prevents the normal flow of air to the motor,
the thermal protector turns the motor off automatically. This allows the motor to cool in
order to prevent possible damage to the vacuum cleaner.
To correct problem:
➢ ➢ Turn off and unplug vacuum cleaner to allow the vacuum cleaner to cool and the
thermal protector to reset.
➢ ➢ Check for and remove clogs, if necessary.
➢ ➢ Also check and replace any clogged filters.
➢ ➢ Wait approximately thirty (30) minutes and plug the vacuum cleaner in and turn it
on to see if the thermal protector has reset.
Hose Swivel
➢ ➢ The hose swivel allows the hose to
➢ ➢ Check hose for twisting before
Edge Cleaner
➢ ➢ Active brush edge cleaners are on
➢ ➢ Guide either side of the Power Nozzle
Thermal Protector
- 20 -
turn without moving the canister.
This is helpful for cleaning in small
areas.
pulling canister.
both sides of the Power Nozzle.
along baseboards or next to
furniture to help remove dirt trapped
at carpet edges.
Publicité
Table des Matières
