Table des Matières
Publicité
'
l
installation De l
Cadre de l'écran de
sécurité
Haut / Bas
support
Figure 52: Installation Support à Écran
Figure 53: Installation de l'écran de sécurité
sur Cabinet Support (Pièces pour plus de
42
Installation Secondaire
'
écran De sécurité
Support droit
gauche
Support
sécurité.
clarté)
:
The safety screen supplied with the unit comes
assembled. When installed, the screen should not
extrude out any farther than the surround panel.
If it proturudes past the surround panel then the
Surround Mounts will need to be moved. See
your surround panel's instruction sheet for more
information.
Safety Screen Assembly
If your screen has been damaged, a new screen
can be ordered and replaced as shown below.
1. Attach the left, right, top/bottom brackets
onto the safety screen using a T20
screwdriver and the supplied sixteen (16)
#8 T20 screws (see Figure 52). Do not over-
tighten the screws, doing so could cause
Haut / Bas
them to strip out of the screen frame.
support
2. Lift the face upright in front of the fireplace
with the four (4) hooks pointing towards
the fireplace. Slide the hooks into the
corresponding brackets on each side of the
cabinet (see Figure 54). Ensure the hooks are
secure before releasing the safety screen.
Figure 54: Installation Ecran de sécurité sur
les supports.
Publicité
Table des Matières
