Télécharger Imprimer la page

Selve SE Pro Notice De Réglage page 31

Masquer les pouces Voir aussi pour SE Pro:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Setting of the end positions
4.5.2. Manual setup-mode, two fixed points
 in operation bottom position, top position
When the movement is interrupted once, the system is in manual setup-mode.
In manual setup-mode, the lower end position must be set and stored first. Afterwards,
the upper end position can be set and stored.
Setting with
setting switch
6 s
3 s
3 s
Drive
Press the E button of the setting switch for 6 seconds.
Move the motor to the lower end position with the UP or
DOWN button.
Press the E button for 3 seconds.
The correct rotation direction assignment will be carried out
at the end of the end position setting.
Move the motor to the designated upper end position.
Press the E button for 3 seconds.
The end positions are now set and the rotation direction
assignment is correct. Perform a test run.
31
GB
GB

Publicité

loading

Ce manuel est également adapté pour:

Se pro 2/7Sw60Se pro 2/3Se pro 2/30Se pro 2/15Se pro 1/10