Record Settings; Manual Record - Abus TVVR20001 Manuel Utilisateur

Record Settings

In the OSD, the hours of the respective days are listed
from left to right (the days are listed from top to bottom).
A colour key is shown underneath the days (i.e. the re-
cording periods in the schedule are shown in colour ac-
cording to the trigger (recording types)).
Colour symbol Key
Blue Normal recording: Period in hours
Green Motion detection
Light blue Motion detection and alarm
Red Alarm
Grey No selection
Green and red Motion or alarm
Select the camera to be set up, then click on "Edit":
1.
Tick the "Enable Schedule" box.
2.
In the drop-down menu next to "Days", either specify
3.
the day to be set or select "All Week".
Tick or untick the "All Day" box. When "All Day" is se-
4.
lected, defined times cannot be entered. The setting
then applies for the entire day.
To make specific time settings, untick the "All Day"
5.
box.
6. Specify the recording type in the drop-down menu:

Time

Motion detection

Alarm

Motion detection or alarm

Motion detection and alarm
7. When making a specific time setting, you can define
up to 8 time periods (each from 00:00 to 00:00). The
times in the individual periods must not overlap.
Note
The "Time" recording type defines the time win-
dow where a recording is made.
The other events (e.g. motion detection and/or
alarm) only trigger the recording after the specific
event has occurred.
22

The camera settings can be copied and applied to all
cameras in the "Schedule" tab.

Select the camera under "Copy" (or select "All"),
then confirm by pressing "Copy".
8. Exit the settings in the recording screen by pressing
OK.

Manual Record

1. Press REC to start manual recording:
2. Select the camera to start manual recording by click-
ing the corresponding button.
Note
Click "All" to record all connected cameras.