On-Screen Keyboard; Switching Off, Locking And Rebooting The Device; Starting The Device - Abus TVVR20001 Manuel Utilisateur

On-screen keyboard

The on-screen keyboard appears after clicking on a text
entry field with the mouse:
The keys have the same function as on a computer key-
board.

To enter the character, left-click the mouse.

To finish data entry, press Enter.

To delete the character in front of the cursor, click on
.

To switch between upper and lower case, click on the
framed a symbol. The current setting is displayed
above the keyboard.

To cancel the entry or exit the field, press ESC.

Starting the device

Important
The device must only be operated with the mains
power specified on the type plate.
For safety reasons, use an uninterruptible power
supply (UPS).
After the device has been connected to the power supply
and the main switch on the rear of the device is switched
on, the DVR status LED lights up.
1. The device carries out a self-test during the start-up
procedure.
2. The setup wizard appears. Exit the wizard to access
the live view.
Switching off, locking and rebooting the
device
Click on "ShutDown" in the main menu. The overview
appears.
1. To switch off the device, select ShutDown and con-
firm by pressing Yes. The device is then switched
off.

Do not press any keys during the shutdown pro-
cedure.
2. To lock the system, select the corresponding Lock
symbol on the left. The user interface is now locked
and a password must be entered to access the
menu.
3. To reboot the device, select the corresponding Re-
boot symbol on the right. The device is then re-
booted.
System operation
15