Publicité
Les langues disponibles
Les langues disponibles
User manual of Colson pulse Oximeter OxyPad – Home ref. CMS50DL / Pro ref. CMS50D
patient.
The instrument does not have low-voltage alarm function, it only shows the low-voltage,
please change the battery when the battery energy is used out.
When the parameter is particularly, the instrument does not have alarm function. Do not
use the device in situations where alarms are required.
Batteries must be removed if the device is going to be stored for more than one month,
or else batteries may leak.
A flexible circuit connects the two parts of the device. Do not twist or pull on the
connection.
1.4 Indication for Use
The Fingertip Pulse Oximeter is a non-invasive device intended for the spot-check of oxygen
saturation of arterial hemoglobin (SpO
home and hospital environments (including clinical use in internist/surgery, anesthesia,
intensive care ect.). This device is not intended for continuous monitoring.
2 Overview
The pulse oxygen saturation is the percentage of HbO
the O
concentration in the blood. It is an important bio-parameter for the respiration. For the
2
purpose of measuring the SpO
Pulse Oximeter. At the same time, the device can measure the pulse rate simultaneously.
The Pulse Oximeter features in small volume, low power consumption, convenient operation
and being portable. It is only necessary for patient to put one of his fingers into a fingertip
photoelectric sensor for diagnosis, and a display screen will directly show measured value of
Hemoglobin Saturation.
2.1 Classification:
Class II b （MDD93/42/EEC IX Rule 10）
Class II
(U.S.FDA)
) and the pulse rate of adult and pediatric patients in
2
more easily and accurately, our company developed the
2
４
in the total Hb in the blood, so-called
2
Publicité
