Insert Recording - Olympus DIRECTREC DR-2000 Mode D'emploi

Direct Recording

Insert Recording

Additional recording can be inserted into a previously recorded file.
3,4
1
3 4
......................................................................................................................................
Notes
• Ensure that the "Insert recording" box in the [Remote Edit] window is checked or the
recording will not be inserted.
• If you place the slide switch in the STOP position for more than two seconds while moving
the slide switch from the PLAY position to the REC position, the Inserted recording will be
cancelled.
• You cannot select a different recording mode (SP, LP) than that of the original file before
overwriting a recording.
16
1
Check ( )"Insert recording" box in
the [Remote Edit] window.
2
Make sure you are at the right position
in the file where recording insert
should take place.
3
While playing the file, move the slide
switch on the Directrec to the REC
position or press the
button in the [Remote Edit] window to
start inserting an additional recording.
The red record/play indicator light on
Directrec will become lit.
4
Move the slide switch on the Directrec
to the STOP position or press the
(Stop) button in the [Remote
Edit] window to the stop inserting the
additional recording.
(Record)