Maintenance And Cleaning - Scangrip Canvik Basic Instructions D'utilisation

MAINTENANCE AND CLEANING

MAINTENANCE PERSONAL should be qualified and trained in the compressor functions and failure
modes, their rectification, operation and maintenance of the product.
• Regular check period: 1 month. If you find any damage or deformation, please stop use
immediately and ask your manufacturer for help. Never try to repair the product yourself,
except changing safety pin.
• Always keep the unit clean. Especially make sure the coil spring compressor is dry.
• Store the unit in a dry place not causing corrosion. Always pack away the jaws with the coil
spring compressor as delivered.
• Grease the guide spindle if necessary, or at least every six months. Always clean the spindle
before applying grease.
• For all inquiries/spare parts ordering please include the serial number. Ask manufacturer
for help. Unauthorized parts are forbidden.
Recommended grease: graphite grease
GUARANTEE
This tool carries a guarantee according to current law.
Subject to change without any notice.
9