Publicité
Les langues disponibles
Les langues disponibles
REMOVING PACKAGING
• Remove outer carton and external packing from the
wine column.
• There is a box of parts taped to the back of the
appliance. These parts will be used during door panel
installation. Refer to TRIMS INSTALL KIT in the
SUPPLIED PARTS AND TOOLS section.
• There is a box of parts inside the upper compartment.
These parts will be used during installation. Refer to
"INSTALLATION KIT" in the "SUPPLIED PARTS AND
TOOLS" section.
• There is a box of parts on the front of the appliance
underneath the glass door. This box contains an upper
grille for changing hinges from right-hand to left-hand.
Refer to SUPPLIED PARTS AND TOOLS section.
Before Installation
Trims Install Kit
18
• Inspect for damage.
• Ensure the flooring that the appliance is set is
clean/free of debris that could be collected on to,
or pinched in front of the wheels and damaging the
floor. Additionally, it is recommended that the floor
be protected with a plastic covering through out the
installation process.
NOTE: Product only comes with hinges on the right
side. If installation requires door swing to be reversed,
follow instructions in the "Door Swing Reversal' section
to reverse the door swing BEFORE the unit is removed
from the shipping skid and before following the other
steps.
Installation Kit
Upper
Grille
31-1000764 Rev. 0
Publicité
