ebi Talakona Guide De L'utilisateur page 5

Preparation before use
2
1. Assemble the
feeding bowl
2. Put on the lid.
This product got a dual power supply (AA battery and connect to the power outlet).Choose the one that
most suit for you.(lt is recommended to take the battery as a spare power and connect the device to the
power outlet at the same time).When there is a power failure,the battery can be used as a backup power to
ensure it will dispense the meal plan on time.
Key description
Increase
Display time
Decrease
Voltage Indicator (Powered by battery only)
The display time start to blinking: Low battery, Battery replacement reminder.
Please replace batteries immediately.
Under the main interface, press and hold this button for 2s to manually feed a portion.
Press and hold to continuously increase the value.
Press and hold to continuously reduce the value.
Under the main interface, press and hold this button for 3s to set the display time
to current time.
Press once after meal setting to save the value and exit.
During the setting,you can use this button to switch between meal time and portion setting.
(Tips:When the portion value is set to"O",it means no meal plan set for this meal).
When set the time ,you can use it to switch between hour and minute setting.
Also it can be used to switch to next meal plan setting.
1
www.ebi.eu
3
3. Connect to the
power supply
Set the time
Save the setting
Set/switch to
next meal setting
5
EN