Home Decorators Collection DINTON 72009 Guide D'utilisation Et D'entretien page 9

Assembly - Hanging the Fan (continued)
2
Hanging the fan
□
Carefully lift the fan-motor assembly (F) up to the slide-on
mounting bracket (A).
□
Insert the ball portion of the ball/downrod assembly into
the socket of the slide-on mounting bracket (A).
□
Turn the ball/downrod (B) assembly clockwise until it is
seated with the tab of the slide-on mounting bracket (A)
aligned with the slot in the ball.
3
Connecting the safety cable
□
Turn the wood screw (LL) (not provided) into the ceiling.
□
Place the looped end of the safety cable (S) onto the wood
screw and then tighten the screw firmly, or connect the
safety cable directly to the outer joist.
LL
S
9
Please contact 1-800-986-3460 for further assistance.
A
B
C
FF
D
E
A
HOMEDEPOT.CA