Uline Monarch 1155 Manuel D'instructions

π
H-993
MONARCH 1155
TWO LINE LABEL GUN
CHANGING THE INK ROLLER
Figure 1
NOTE: Do not force the cover past the click
position.
2. Push the release bar to release ink roller.
(See Figure 2)
Figure 2
3. Hold the ink roller on each end, remove and discard.
4. Hold the new ink roller on each end and snap into
place.
PAGE 1 OF 9
1-800-295-5510
uline.com
INSTRUCTIONS
1. Push the release button
and swing the cover open
completely. You should
hear a click. (See Figure 1)
SETTING PRINT CHARACTERS
1. For the first line, use the character key on the side of
the gun to find the alpha character conversion.
2. Pull the knob out until the indicators are on the
desired band. (See Figure 3)
Figure 3
3. Turn the knob until the desired character appears
black on a white background between the
indicators. (To print a blank, select the blank space
for that band).
4. Repeat steps 2-3 for each band.
5. Push the knob in when you are done.
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
A B C D E F G H I J K L
1 2 3 4 5 6 7 8 9 7 5
0324 IH-993