Télécharger Imprimer la page

Liens rapides

H-8783
UNIVERSAL LABEL REWINDER
OPERATING ISSUE
Rewinder feeds supply,
instead of rewinding.
Core does not stay on
core holder.
Supply is pinched when
rewinding.
Rewinder is pulling
too hard on supply or
supply perforations are
breaking.
PAGE 1 OF 3
1-800-295-5510
uline.com
TROUBLESHOOTING
RECOMMENDATIONS
Ensure the direction switch is set properly.
Ensure the inside core holder is the one with the small
metal clips on the edge.
Ensure the outer disk has not been pushed in too far.
Ensure the supply is fed under the pick-up arm and then
attached to the empty core or coreless adapter.
Para Español, vea página 2.
Pour le français, consulter la page 3.
0325 TH-8783
loading

Sommaire des Matières pour Uline H-8783

  • Page 1 Para Español, vea página 2. Pour le français, consulter la page 3. H-8783 1-800-295-5510 uline.com UNIVERSAL LABEL REWINDER TROUBLESHOOTING OPERATING ISSUE RECOMMENDATIONS Rewinder feeds supply, Ensure the direction switch is set properly. instead of rewinding. Core does not stay on Ensure the inside core holder is the one with the small core holder.
  • Page 2 H-8783 800-295-5510 uline.mx REBOBINADOR EXTERNO UNIVERSAL SOLUCIÓN DE PROBLEMAS PROBLEMA DE FUNCIONAMIENTO RECOMENDACIONES El rebobinador ingresa ls etiquetas Asegúrese de que el interruptor de dirección esté en vez de rebobinarlas. configurado adecuadamente. El núcleo no permanece en el Asegúrese de que el soporte del núcleo interior sea el soporte del núcleo.
  • Page 3 H-8783 1 800 295-5510 uline.ca ENROULEUR UNIVERSEL D'ÉTIQUETTES ADHÉSIVES DÉPANNAGE PROBLÈME RECOMMANDATIONS L'enrouleur distribue au Assurez-vous que l'interrupteur de sens est correctement lieu de réenrouler. placé. Le mandrin ne se Assurez-vous que le support de mandrin interne est celui maintient pas sur le qui est muni de petites attaches métalliques sur le bord.