General Safety Instructions; Purpose - Calira EVS 36/20-DS/IU Mode D'emploi

General safety instructions

The following important safety instructions must be
observed when using electric devices, as protection
against electric shock, injury and fire hazard. Please read and
follow these instructions before using the device.
Setting up
Please ensure that the device is placed securely and cannot
fall down or tip over. Always position cables so that nobody
can trip over them. Do not expose electric devices to rain. Do
not operate electric devices in a damp or humid environment.
Do not operate electric devices in the vicinity of flammable
liquids or gases. Place electric devices so that children do not
have access to them.
Protection against electric shock
Only operate devices whose housing and cables are undam-
aged. Ensure safe cable positioning. Do not pull cables.
Safeguard the electric connection of the devices with a
30 mA-rated leakage current circuit breaker, and only
operate it with this protection. Observe the power supply
companies regulations.
Use
Do not use electric devices other than for the purpose speci-
fied by the manufacturer.
Accessories
Only use accessories and supplementary devices supplied or
recommended by the manufacturer.

Purpose

The power supply is a combination of an automatic charger
and an automatic battery separator.
It is used to supply 12 V voltage and to charge exclusively
12 V lead accumulators, comprising 6 single cells (e.g. car
battery), with a capacity of
70 – 200 Ah for the power supply EVS 36/20-DS/IU
and
100 – 300 Ah for the power supply EVS 36/30-DS/IU.
The power supply is universally usable and designed for per-
manent operation. It is particularly suitable for use in campers.
The recommended use is with AGM / gel batteries. The power
supply must only be operated in dry spaces.
21