1. Manuels
  2. Marques
  3. Lifetime Manuels
  4. Rangement extérieur
  5. 60127
  6. Instructions d'assemblage

Lifetime 60127 Instructions D'assemblage

Masquer les pouces
Table des Matières

Liens rapides

Télécharger ce manuel
20' x 8'
OUTDOOR STORAGE SHED
MODEL 60127
BEFORE ASSEMBLY:
• Assemble on a level platform
• At least 3 people recommended for setup
WATCH
3D ANIMATION
OF THE FULL ASSEMBLY
SCAN THE
CODE
TOOLS REQUIRED
QUESTIONS?
Call: 1-800-225-3865
7:00 am-5:00 pm (Monday-Friday) MST
and 9:00 am-1:00 pm Saturday MST
OR SEARCH
1213342
CONTACT LIFETIME
Live Chat: www.lifetime.com/customerservice
(click on "LIVE CHAT" tab)
For Customer Service in mainland Europe:
E-mail: cs@lifetimeproducts.eu
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
5/16" (≈8 mm)
5/16" (≈8 mm) Wood Drill Bit
5/16" (≈8 mm) Masonry Drill Bit
®
CUSTOMER SERVICE:
MODEL# AND PRODUCT ID
Model Number: 60127
Product ID:
TABLE OF CONTENTS
Icon Legend...............................4
Warnings & Notices.....................5
Platform Construction.................6
Truss Assembly.........................11
Gable Assembly........................18
Door Assembly..........................23
Floor Assembly.........................38
Wall Assembly...........................43
Shelving Installation.................50
Parts Identifi er..........................51
Roof Assembly..........................58
Window Installation...................80
Shutter Installation...................82
Accessory Installation................85
Door Alignment........................91
Shed Anchoring........................93
Cleaning & Care........................99
Registration...........................100
Warranty..............................101
(both are needed when contacting us)
Table des Matières
loading

Manuels Connexes pour Lifetime 60127

Sommaire des Matières pour Lifetime 60127

  • Page 1: Table Des Matières

    (click on “LIVE CHAT” tab) MODEL# AND PRODUCT ID Call: 1-800-225-3865 (both are needed when contacting us) For Customer Service in mainland Europe: Model Number: 60127 7:00 am–5:00 pm (Monday–Friday) MST E-mail: cs@lifetimeproducts.eu Product ID: and 9:00 am–1:00 pm Saturday MST...

  • Page 2: Instructions D'assemblage

    Enregistrement......100 Garantie........102 QUESTIONS ? ® CONTACTER NOS SERVICES À LA CLIENTÈLE LIFETIME Chat en direct: www.lifetime.com/customerservice N° DE MODÈLE ET RÉFÉRENCE DU PRODUIT (cliquer sur la languette « LIVE CHAT ») (il faut avoir les deux en entrant en contact avec nous) Composer le 1-800-225-3865 Pour les services à...

  • Page 3: Instrucciones De Ensamblaje

    Broca de albañilería de 8 mm Registro........100 Garantía........103 ¿PREGUNTAS? ® PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME MODEL E ID DEL PRODUCTO Chat en vivo: www.lifetime.com/customerservice (se necesitan los dos al contactarnos) Número de modelo: 60127 Marcar : 1-800-225-3865 (cliquear en la lengüeta «LIVE CHAT»)

  • Page 4: Icon Legend

    ICON LEGEND / LÉGENDE DES ICÔNES / SIGNIFICADO DE LOS ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. •...

  • Page 5: Warnings & Notices

    WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...

  • Page 6: Platform Construction

    PLATFORM CONSTRUCTION / CONSTRUCTION DE LA PLATE-FORME / CONSTRUCCIÓN DE LA PLATAFORMA • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform.
  • Page 7 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) CONCRETE REQUIRED / BÉTON REQUIS CONCRETO REQUERIDO 2 yd (1,53 m CONCRETE PLATFORM / PLATE-FORME EN BÉTON PLATAFORMA DE CONCRETO • The concrete should be approximately 4" (10,2 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 240"...
  • Page 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA WOOD PLATFORM / PLATE-FORME EN BOIS PLATAFORMA DE MADERA 4 in/po (10,2 cm)
  • Page 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS 2 in/po x 4 in/po x 238 1/4 in/po (5,1 cm x 10,2 cm x 6,05 m) (x2) 2 in/po x 4 in/po x 90 1/2 in/po (5,1 cm x 10,2 cm x 2,30 m) (x16) 16d 3 1/2 in/po (16d x 8,89 cm) (x64) 1.2.1...
  • Page 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS 46 1/4 in/po x 93 1/2 in/po x 3/4 in/po 48 in/po x 93 1/2 in/po x 3/4 in/po (118 cm x 2,38 m x 19,1 mm) (x1) (1,22 m x 2,38 m x 19,1 mm) (x4) 8d 2 in/po (8d 5,08 cm) (x96)

  • Page 11: Truss Assembly

    TRUSS ASSEMBLY / ASSEMBLAGE DES FERMES / ENSAMBLAJE DE LAS CERCHAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje CXK (x2) DTK (x30) ADY (x27) ADJ (14) ADK (x56) DTJ (x1) AHT (x1) 11 9/16 in/po (≈29,4 cm) ADH (x7)
  • Page 12 • En cas d’avoir des problèmes avec cette section, suivre le code en bas pour voir un vidéo sur l’assemblage dans cette section. • En caso de tener problemas con esta sección, seguir el código debajo para ver un video sobre el ensamble en esta section. http://go.lifetime.com/ 20’ x 8’ Outdoor Storage Shed Sec2 SIDE TRUSSES (x2) / FERMES LATÉRLES (x2)
  • Page 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADY (x8) ADK (x8) 7/16 in/po (x2) (≈11 mm) (x2) 11 9/16 in/po (≈29,4 cm) ADH (x2) ADJ (x4) ADY (x2)
  • Page 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADJ (x8) 7/16 in/po (x2) (≈11 mm) (x2) DTK (x16) 3/8 in/po (x2) (≈10 mm) (x2) ADY (x16) 11 9/16 in/po (≈29,4 cm) ADK (x32) ADH (x4)
  • Page 15 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) DTK (x4) ADK (x6) ADY (x2) CENTER TRUSS (x1) / FERME CENTRALE (x1) ARMAZÓN CENTRAL (x1) •...
  • Page 16 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (x2) (≈10 mm) (x2) DTK (x2) ADK (x1) DTJ (x1) CXK (x2) 2.11 • Attach the Vertical Truss Brace (DSN) to the Truss. Only fi nger tighten this Nut (ADK) for now. •...
  • Page 17 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (≈11 mm) (x2) ADJ (x2) 3/8 in/po (x2) AHT (x1) (≈10 mm) (x2) 11 9/16 in/po (≈29,4 cm) ADH (x1) ADK (x1) ADY (x1)

  • Page 18: Gable Assembly

    GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLAJE DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje EYR (x2) ADZ (x6) ENH (x2) AIQ (x2) EYQ (x2) ADK (x2) AEE (x14) CXK (x2) ADV (x10)
  • Page 19 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) • Align the holes in the Left (AGH) and Right (AGI) Side Gable Halves. • Aligner les trous dans les pignons latéraux gauche (AGH) et droite (AGI). •...
  • Page 20 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AEE (x5) ADW (x5) AHS (x2) ADV (x4) • Insert an End Cap (AHS) into each end of the Header •...
  • Page 21 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADW (x5) ADZ (x2) AEE (x7) AHS (x2) CXK (x2) EYQ (x2) • Secure with the hardware included. Do not overtighten. •...
  • Page 22 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADK (x2) ADV (x6) EYR (x2) AEE (x2) 3.11 • Align the holes in the Header with those in the Entry Gable. •...

  • Page 23: Door Assembly

    LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADW (x2) BYZ (x4) ADJ (x4) AEE (x6) AEB (x4) ACH (x4) BYS (x2)
  • Page 24 (BDJ). sección. http://go.lifetime.com/ldslidelatch • Door Channels (BLH) are specifi cally designed to bow. This ensures a tight fi t when they are closed and latched, making your shed more secure. These channels are formed with a slight bend to the adjoining door edge—like parentheses facing each other: ( ). When the door handle is gently closed and latched, there should be a slight pressure sealing the doors and eliminating any gaps.
  • Page 25 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHM (x2) BYR (x1) BYS (x1) • Set the Deadbolts (AHM) down into the recesses at the top and bottom of the Door. Then, slide the Door End Channel (BLH) over the edge of the Door and the bottom of the Deadbolts as shown.
  • Page 26 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po BYZ (x2) (≈11 mm) ACH (x2) ADW (x1) ECY (x1) ADJ (x2) ECX (x1) AEB (x2) AEE (x3) •...
  • Page 27 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) • Align the holes in the Pane with those in the Door, and gently set a Window Pane (DHN) down onto the Door. •...
  • Page 28 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BYZ (x2) BYR (x1) 7/16 in/po ACH (x2) (≈11 mm) BYS (x1) AHM (x2) ADW (x1) ECY (x1) ECX (x1) ADJ (x2) AEB (x2)
  • Page 29 RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLE DE LA PUERTA DERECHA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje BYS (x2) AEB (x2) BYR (x2) ADW (x2) AEE (x2) BYZ (x4) ECW (x2)
  • Page 30 • Door Channels (BLH) are bowed by design, ensuring a tight fi t when they are closed and latched, making your shed more secure. These channels are formed with a slight bend to the adjoining door edge—like parentheses facing each other: ( ). When the door handle is gently closed and latched, there should be a slight pressure sealing the doors and eliminating any gaps.
  • Page 31 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po BYZ (x2) (≈11 mm) AEE (x1) BBI (x1) ADJ (x2) ADW (x1) AEB (x2) ECW (x1) ACH (x2) ECZ (x1) EDA (x1)
  • Page 32 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) • Align the holes in the Pane with those in the Door, and gently set a Window Pane (DHN) down onto the Door. •...
  • Page 33 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po BYZ (x2) BYR (x1) (≈11 mm) ADW (x1) AEB (x2) BYS (x1) AEE (x1) ADZ (x14) ACH (x2) ECZ (x1) EDA (x1)

  • Page 34: Domed Skylight Assembly

    DOMED SKYLIGHT ASSEMBLY / ASSEMBLAGE DES LUCARNES EN FORME DE DÔME / ENSEMBLAJE DE LOS TRAGALUCES EN FORMA DE CÚPULA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje EFA (x24) AEE (x48) AHI (x2) ADK (x24) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...
  • Page 35 • Lay the Butyl Tape (AHI) over the groove along the top edge of the opening in the Roof Panel, and cut it. Peel back the paper backing a bit, and continue laying the Butyl Tape along the groove being sure to slightly overlap the ends.
  • Page 36 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Run your thumb along the Butyl Tape to remove any bubbles. Then, completely remove the paper backing. •...
  • Page 37 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADK (x24) AEE (x48) EFA (x24) • Remove the protective plastic from both sides of the Skylight (AGB). Align the holes in the Domed Skylight with those in the Roof Panel, and insert the Screws (EFA).

  • Page 38: Floor Assembly

    FLOOR ASSEMBLY / ASSEMBLAGE DU PLANCHER / ENSAMBLAJE DEL PISO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ADC (x2) AHO (x4) BQC (x48) Note: These are not anchoring screws. Their purpose is to fasten together the Floor Panels. Nota: Estos no son Tornillos de anclaje.
  • Page 39 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Hold an Inner Floor Panel (CUD) at an angle and slide the tabs along the edge underneath an Outer Floor Panel (CUW).
  • Page 40 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Repeat the last step. If the hole • Repeat step 7.2. is not at this corner, turn the Panel •...
  • Page 41 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHO (x4) • Decide on which ends you would like to install your Doors (we placed the Doors on the front and the left side; however, you may install them on the front and on the left or right side of the shed).
  • Page 42 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BQC (x42) • Insert the Screws (BQC) through the divots in the Floor Panels and into the tabs of the adjacent Floor Panels. (The divots are near the seams of the Floor Panels.) •...

  • Page 43: Wall Assembly

    WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADZ (x160) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal 67 3/4 in/po (≈1,72 m)
  • Page 44 • Ningún tornillo en el agujero superior. http://go.lifetime.com/20x8fwvertwall • Each Corner Wall Panel has a three-letter ID, AGL, AGN, AGW, or • Secure a Wall Support Channel (AFM) to the Corner AGY, located near the top edge of the Panel.
  • Page 45 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x16) • Secure a Wall Support Channel (AFM) to the Left Narrow • Secure a Wall Support Channel (AFM) to the Corner Wall Panel (CKK) using four (4) Screws (ADZ).
  • Page 46 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x5) • Insert the two tabs at the bottom of the Narrow • Slide the Panel to the left. Wall Panel (CKN) into the eleventh and twelfth slots •...
  • Page 47 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x10) 8.10 • Insert the Wall Panel (AHD) in the next four • You may install the Side Doors on either end; however, you will need available slots, and slide the Panel to the left.
  • Page 48 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x14) 8.12 • Bend Corner Panel and pull down on the Panel to snap the remaining tabs in place. To help with insertion, place the Wood Block (AIW) under the Floor Panel directly under the tab being inserted.
  • Page 49 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x60) 8.15 8.16 • Insert this Corner Wall Panel (AGN) in the same way •...

  • Page 50: Shelving Installation

    SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIY (x2) ADZ (x14) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico...

  • Page 51: Parts Identifi Er

    PARTS IDENTIDIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOÎTE 1 CONTENIDO DE LA CAJA 1 45 1/2 in/po (1,16 m) CVE (x2) CUW (x2) 45 1/2 in/po (1,16 m) CVC (x2) AGQ (x10) BDJ (x2) BDK (x2)
  • Page 52 PARTS IDENTIDIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS METAL KIT 1 / CONTENU DU KIT DE PIÈCES EN MÉTAL 1 CONTENIDO DEL KIT DE PIEZAS DE METAL 1 34 1/8 in/po (≈86,7 cm) DSO (x1) 50 9/16 in/po (≈1,28 m) DSR (x4) 75 1/2 in/po (≈1,92 m) BLH (x2)
  • Page 53 PARTS IDENTIDIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 / CONTENU DE LA BOÎTE 2 CONTENIDO DE LA CAJA 2 EWA (x1) EVZ (x1) CONTENTS METAL KIT 2 / CONTENU DU KIT DE PIÈCES EN MÉTAL 2 CONTENIDO DEL KIT DE PIEZAS DE METAL 2 19 3/4 in/po (≈50,2 cm) EGQ (x28)
  • Page 54 PARTS IDENTIDIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS SMALL PARTS BOX 3 / CONTENU DE LA BOÎTE DE PETITES PIÈCES 3 CONTENIDO DE LA CAJA DE PIEZAS PEQUEÑAS 3 31 in/po (78,7 cm) 31 in/po (79 cm) CVD (x10) CVF (x5) DHN (x4)
  • Page 55 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Choose how high you would like the Long Shelf to be by selecting the corresponding notches (there are fi ve) in the Wall Support Channels, and insert the two Shelf Brackets (AIY) into the slots in the Wall Support Channels.
  • Page 56 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) • Set the Shelf down onto the Brackets. • Mettre l’étagère sur les équerres. • Colocar el estante en las escuadras. •...
  • Page 57 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x2) • Attach the Shelf (AFV) to the Shelf Brackets using two (2) Screws (ADZ)—one (1) at the front of each Bracket. •...

  • Page 58: Roof Assembly

    800-225-3865. ® • Si vive en un área donde la nieve puede convertirse de larga duración y extra pesada, Lifetime ofrece a precio de coste un kit suplementario para la carga de nieve que se puede instalar en su caseta para protegerla del peso adicional de la nieve en el tejado. Por favor, póngase en contacto con nuestro Departamento de servicios a clientes para obtener más información al 800-225-3865.
  • Page 59 ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLE DEL TEJADO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico DRB (x1) AGQ (x12) AHB (x2) BDR (x1) BDS (x1) (x1) DRA (x1) DQB (x4) (x1) CVB (x2)
  • Page 60 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS CWU (x24) 10.1 • Attach a Corner Trim (CVG) to a corner using six (6) Screws (CWU)—two at the top, two in the middle, and two at the bottom.
  • Page 61 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHP (x2) 10.2 • Pull the Hinge Tube down out of the Left Door about six inches. Align the hole at the bottom of the Hinge Tube with the slit in the Bushing, and insert the Tube.
  • Page 62 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) 10.5 • Secure the Entry Gable to the shed using six (6) Screws (ADZ). • Fixer le pignon d’entrée à l’abri à l’aide de six (6) vis (ADZ). •...
  • Page 63 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10.6 • Set a Truss Assembly into the notches on the fi rst two opposite Wall Panels. Set a Roof Panel (AGQ) onto the Gable, Wall Panel, and Truss Assembly.
  • Page 64 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) 10.8 • Align the four holes in the Wall Panel with those at the bottom of the Roof Panel, and insert four (4) Screws (ADZ) to secure the Panel in place.
  • Page 65 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) 10.10 • Insert the Roof Support (AFL) into the notches in the Gable and between the Truss and the Roof Panel. Insert three (3) more Screws (ADZ) to secure the Panel in place.
  • Page 66 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x40) 10.13 • Attach the third and fourth Roof Panels (AGQ) similar to the way you attached the fi rst two. Secure with ten (10) Screws (ADZ) each.
  • Page 67 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x42) 10.16 10.17 • Attach the Panels to the right side of the shed • Attach a Side Gable to the Shed using in the same way you did to the left.
  • Page 68 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) DTV (x2) AEE (x2) CXK (x2) AHP (x2) 10.19 • Secure the ends of the Support Tube to the underside of the Trusses using the hardware included. •...
  • Page 69 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADZ (x1) 10.21 • Slide the holes in the Entry Gable down over the two Hinge Tubes. The ends of the Gable go in the Trusses. •...
  • Page 70 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) ECR (x1) ECS (x1) BZA (x2) ADK (x2) AEE (x4) 10.23 • Attach the two center, rear Roof Panels using only one Roof Support per Panel.
  • Page 71 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADZ (x14) 10.25 • Fold the ends of the Large Angled Roof Panel (DRA) and set it down onto the shed as shown. Secure the Panel to the Entry Gable and Center Truss with twelve (12) Screws (ADZ) at the locations shown.
  • Page 72 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) 10.27 • An adult must apply a downward pressure on Panel (DRB) while another inserts these Screws (ADZ). •...
  • Page 73 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10.29 • Insert the two Center Roof Extension Panels (CVD) into the Skylight Connector (CVF) as shown. Repeat this step 4 times (for a total of fi...
  • Page 74 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) 10.31 • Secure the Skylights to the Extensions at the four points shown. • Attacher les lucarnes aux panneaux supplémentaires aux quatre points indiqués.
  • Page 75 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x12) 10.34 • Slide the two Skylight Assemblies from step 10.33 to the Connector and Extensions from step 10.30. •...
  • Page 76 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x12) 10.37 No screw in these holes yet / Aucune vis déjà dans ces trous / •...
  • Page 77 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x56) 10.40 • Secure the Long Roof Extensions to the Skylight No screw in these holes yet / Aucune vis déjà...
  • Page 78 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS CUZ (x4) ADZ (x24) 10.42 • Connect the Roof Panel Enxtensions to the Roof Panels and Gables at the locations shown. •...
  • Page 79 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AXX (x2) AIC (x1) AIM (x1) ADX (x4) 10.44 • Insert the Clips (AXX) with the “arrow” facing up. •...

  • Page 80: Window Installation

    WINDOW PANE INSTALLATION / INSTALLATION DES CARREAUX / INSTALACIÓN DE LAS HOJAS DE VENTANA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ADY (x2) ADZ (x8) AIS (x4) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico...
  • Page 81 • Retirar la pelicula protectora de las dos caras de la hoja de ventana (AHE). Con el borde curvado hacia arriba y el interior, deslizar la hoja en su lugar. http://go.lifetime.com/8wininstall 11.2 11.3 • Insert a Screw (ADY) into the hole at the bottom of •...

  • Page 82: Shutter Installation

    SHUTTER INSTALLATION / INSTALLATION DES VOLETS / INSTALACIÓN DE LAS CONTRAVENTANAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ARV (x16) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico AYI (x4)
  • Page 83 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ARV (x1) 12.1 • There are four sets of two screw-location indicators. One by one, insert the Screws (ARV) through the indicators from the inside of the shed outward, and attach the Shutters (AYI) to the outside of the Wall Panels.
  • Page 84 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET PIÈCES REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ARV (x7) 12.2 • Align the screw bosses in the Shutters (AYI) with the Screws (ARV) as you insert the Screws. Secure both Shutters to the Panels.

  • Page 85: Accessory Installation

    ACCESSORY INSTALLATION / INSTALLATION DES ACCESSOIRES / INSTALACIÓN DES ACCESORIOS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje ADZ (x14) EDL (x18) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Large Part / Grande pièce Pieza grande EDI (x2)
  • Page 86 (ADZ). Repitir este paso para el otro juego de puertas. http://go.lifetime.com/doorbaghooks 13.2 • Insert the eighteen (18) Wall Hooks (EDL) into any of the notches in the Wall Panels (either side of the shed). Then push downward to lock them in place.

  • Page 87: Snowload Kit Installation

    SNOWLOAD KIT INSTALLATION / INSTALLATION DU KIT LA CHARGE DE NEIGE / INSTALACIÓN DEL KIT DE LA CARGA DE NIEVE HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje BRK (x200) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal...
  • Page 88 • En caso de algun problema con esta sección, seguir el código debajo para ver un video sobre el ensamble en esta sección. http://go.lifetime.com/sidesnowload 14.1 • Set a Gusset (EGQ) up against a Truss as shown. Using an electric Drill, insert four Screws (BRK). Repeat this step for both sides and both ends of all Trusses except for the Center Truss.
  • Page 89 SECTION 14 (CONTINUED) / SECTION 14 (SUITE) SECCIÓN 14 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x28) 7/16 in/po (x2) (≈11 mm (x2)) 14.1 • Secure the Short Truss Brace to the Truss Assembly using four (4) Self-Drilling/Self-Tapping Screws (BRK). Tighten the Cap Nuts.
  • Page 90 SECTION 14 (CONTINUED) / SECTION 14 (SUITE) SECCIÓN 14 (CONTINUACIÓN) TOOLS AND PARTS REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BRK (x8) 14.2 • Place the Left Gable Support (EGR) up fl ush against the Gable and Roof as shown. Secure with two (2) Self-Tapping Screws (BRK) to the Center Truss.

  • Page 91: Door Alignment

    DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO NO HARDWARE INCLUDED FOR THIS SECTION AUCUNE QUINCAILLERIE INCLUSE POUR CETTE SECTION NINGÚN HERRAJE INCLUIDO PARA ESTA SECCIÓN PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Wood Parts / Pièces en bois Piezas de madera...
  • Page 92 15.2 • If the Right Door scrapes the Floor or is lower than the Left Door, insert a Shim (AIX) under the Floor directly under the bottom corner of the Right Door. If necessary, repeat for the Left Door until both Doors are level and do not scrape.

  • Page 93: Shed Anchoring

    SHED ANCHORING / ANCRAGE DE L’ABRI / ANCLAJE DE LA CASETA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO 5/16 in/po (≈8 mm) Wood Drill Bit Foret à...
  • Page 94 SECTION 16 (CONTINUED) / SECTION 16 (SUITE) SECCIÓN 16 (CONTINUACIÓN) FOR CONCRETE PLATFORMS / POUR LES PLATE-FORMES EN BÉTON PARA PLATAFORMAS DE CONCRETO 5/16 in/po (≈8 mm) 16.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a concrete platform, we recommend using a hammer drill, 5/16 in/po (≈8 mm) masonry bit, sixteen (16) 3/8 in/po x 2 in/po (≈10 mm x 5 cm) Concrete Screws and sixteen (16) 3/8 in/po x 1 in/po (≈10 mm x 2,5 cm) Fender Washers.
  • Page 95 SECTION 16 (CONTINUED) / SECTION 16 (SUITE) SECCIÓN 16 (CONTINUACIÓN) FOR WOOD PLATFORMS / POUR LES PLATE-FORMES EN BOIS PARA PLATAFORMAS DE MADERA 5/16 in/po (≈8 mm) 16.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a wood-framed platform, we recommend using a drill, 5/16"...
  • Page 96 NOTES / REMARQUES / NOTAS...
  • Page 97 NOTES / REMARQUES / NOTAS...
  • Page 98 NOTES / REMARQUES / NOTAS...

  • Page 99: Cleaning & Care

    Congratulations on your Lifetime ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.

  • Page 100: Registration

    à des tiers, et ne leur permettra pas d’utiliser vos données personnelles à leurs propres fi ns. Nous vous invitons à lire notre politique de confi dentialité à www.lifetime.com (en anglais seulement) ENREGISTRER CE PRODUIT aujourd’hui! REGISTRAR EL PRODUCTO EN LÍNEA EN WWW.LIFETIME.COM...

  • Page 101: Warranty

    This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of merchantability or fi tness for use to extent permitted by Federal and state law. Neither Lifetime Products, Inc., nor any representative assumes any other liability in connection with this product. This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.

  • Page 102: Garantie De Fabrication Limitée De 10 Ans

    à cette condition et aucun représentant de la société ne peut renoncer à l’application de cette politique ou la modifi er. Ce produit n’est pas destiné à des fi ns institutionnelles ou commerciales; Lifetime Products, Inc. n’assume aucune responsabilité à cet égard. Toute utilisation institutionnelle ou commerciale annule la garantie.

  • Page 103: Garantía

    NO ESTÁN DISPONIBLES O SON OBSOLETAS. El comprador original recibe una garantía de que los productos de césped y jardín de Lifetime están libres de defectos de material o mano de obra durante un período de 10 años a partir de la fecha de compra original al por menor.
  • Page 104 ® AMÉLIORER VOTRE ACHAT LIFETIME EN AJOUTANT DES ACCESSOIRES OU DES AUTRES PRODUITS ® Pour acheter des accessoires ou d’autres produits Lifetime , nous rendre visite à : www.lifetime.com Ou composer le 1-800-424-3865 Du lundi au vendredi 7 h – 17 h (HNR) et samedi 9 h – 13 h (HNR) ®...

Table des Matières