For Your Safety - Hazet-Werk 1991-1 Mode D'emploi

GB
This paragraph gives an over-
view of important security advice
to help to ensure the optimal
protection of the personnel as
well as the safe and trouble-free
operation of the tool.
Additionally, the different chap-
ters contain security advice that is marked with
symbols in order to avert immediate danger.
Furthermore, all stickers and labels on the tool
must be observed and must be kept legible.
1. General Aspects
• This tool was developed and manufactured
according to the technical norms and stand-
ards valid at the time and is considered to
be operationally reliable. Nevertheless, the
tool can present a danger when it is not
used as intended or in an inappropriate way
by unqualified personnel. Please make sure
that any person using this tool or carrying
out maintenance work carefully reads these
operating instructions and fully understands
all information given, before using the tool.
• Any modification of the tool is strictly
forbidden.
• All security advices, warning and operation
notices on the device have to be kept legible.
Replace all damaged labels or stickers.
• All indications concerning setting values and
setting ranges must be observed.
2. Owner's Liability
• Keep the operating instructions together with
the tool at all times.
• The tool must only be used if it is in good
working order.
• All safety equipment, e.g. fire extinguisher etc.,
must always be within reach and should be
checked regularly.
• In addition to the safety advice given in these
operating instructions, the general safety
regulations, regulations for the prevention of
accidents and regulations for environmental
protection being valid for the application
area of this tool have to be observed and
respected.
Do not let the beam enter your eye, another person's eye or the eye of an animal!
12
2

For Your Safety

3. Appropriate Use
given in these operating instructions. In addition
to the safety advice given in these operating
instructions, the general safety regulations,
regulations for the prevention of accidents and
regulations for environmental protection being
valid for the application area of this tool have to
be observed and respected.
Power tools have to be used, inspected and
maintained always in compliance with the
respective local, state, national or federal
regulations.
• The Non-Contact Infrared Thermometer can
be used to measure the temperature of an ob-
jects' surface that is improper to be measured
by traditional (contact) thermometer (such as
moving objects, live components or objects
with restricted access.)
• The built-in laser pointer increases target
accuracy.
• The backlight LCD-diplay and the handy
push-button enable convenient, ergonomic
operation.
WIDE RANGE APPLICATION:
• Food preparation, safety and fire inspectors,
plastic moulding, asphalt, marine and screen
printing, measuring ink and dryer temperature,
HVAC/R, diesel and fleet maintenance.
• This Infrared Thermometer must not be used
for medical purposes
• Do not let the beam enter your eye, another
person's eye or the eye of an animal.
• Be careful no to let the beam on a reflective
surface strike your eye.
• Do not allow the laser light beam impinge on
any gas which can explode.
This may cause severe eye injuries.
Operational reliability can only be en-
sured, if the tool is used as intended
and in compliance with the indications
USA
-