Glem Gas GHF527SI Manuel D'instructions page 12

1. To install the charcoal filter, lock it until the stop click is heard.
2. Install the face plate after charcoal filter is installed.
3. To remove the charcoal filters, remove the charcoal filter by turning
anti-clockwise.
LAMPS
This range hood may require two GU10 LED SPOT (AC 230V, 4W Max each)
WARNING: Always switch off the electrical supply before carrying out any
operation on the appliance.
To change LED spot:
1. Remove the aluminum filter.
2. Loosen the LED spot anti-clockwise, and replace with LED of same kind.
10