TDK-Lambda WMM30 Mode D'emploi page 15

WMM30 Product HANDBOOK
Output Parameters:
Model number Vout
(V)
WMM30CN050 5
WMM30CN090 9
WMM30CN120 12
WMM30CN150 15
WMM30CN180 18
WMM30CN240 24
Model numbers may have a suffix applied for non-standard connectors and cables (WMM30CN-xxx)
Output Connector (for model numbers without suffix):
Black, straight barrel DC power plug. V+ centre pin, V- outer sleeve.
Ref. Dimension
A 5.5mm
B 2.1mm
L 12mm
Safety Certifications:
rd
IEC/EN 60601-1 3 Edition
CSA-C22.2 No.60601-1 Edition 3, ANSI/AAMI ES60601-1
EMC Performance:
Tested to EN 60601-1-2 4th Edition. Final compliance must be checked in the end system.
CE mark.
CE marking when applied to any WMM30 product, indicates compliance with the Low Voltage
Directive in that it is designed to meet EN 60335-1, compliance with the EMC Directive and compliance with
RoHS Directive.
Cooling the product:
The WMM30 products are external power supplies. To ensure correct thermal performance at full load the
product should be installed in the end use equipment as below and operated in accordance with the derating
curve.
Installation orientation:
For optimum thermal performance – mount the WMM30 product into an appropriate AC wall socket. When
using an AC extension cable ensure that the WMM30 case remains uppermost
Output Maximum
current (A) power (W)
5.0 25
3.3 29.7
2.5 30
2 30
1.67 30
1.25 30
Page 15 of 16
Cable
(UL 1571)
L= 1220MM, 16AWG
L= 1800MM, 16AWG
L= 1800MM, 18AWG
L= 1800MM, 22AWG
Connector
Models without a suffix
Black, straight barrel
DC power plug.
Outside Ø 5.5mm
Inside Ø 2.1mm
Length 12mm
260676 issue 1, June 2020