Ecor Pro DryFan 8 Mode D'emploi page 9

UK
12 / 12 PRO
®
POSITIONING DRYFAN |
External Positioning (Models where Outlet Duct Fitted Only):
When positioning the unit outside the room, connect ducting to the outlet to direct the dry airstream into the
room to be dried. Optionally, the inlet may also be ducted to the room to give a re-circulation effect. In this
case however, because the unit uses a portion for the inlet air for regeneration. Provision must be made in the
inlet duct to draw air also from outside the room.
• for more
than one room
Ø 125 mm 300 mm Ø 40 mm Ø 125 mm
+
9