Installation: Bottom Compressor Models; Built-In Installation Of Single Appliance; Built-In Installation Of Two Or More Appliances - Smeg Rbmu36R Guide D'installation

6. INSTALLATION: BOTTOM COMPRESSOR MODELS

6.1. Built-in installation of single
appliance
For a built-in installation, to cover gaps between
the appliance and the adjacent cabinets and
affix the appliance to the cabinetry, use the
supplied 10 x bracket kit.
Operate as follows:
> Push the appliance into the installation cutout [ 1 ].
1
> Always mount front panel on door before
pushing the unit into its final position inside
the cutout or structure.
> Check the levelling of the appliance, adjusting
its feet and wheels to correct it.
> Secure the appliance to the adjacent cabinets
using the 10 x spacer brackets. [ 2 ]. To make
this operation easier keep the door open.
2
> Mount the bracket covers: first insert them
laterally and then push firmly until a "click" is
heard [ 3 ].
3
26
Side profiles mounting:
Click!
B
Wall or furniture
A Plastic connecting brackets
B Profile trim cover
6.2. Built-in installation of two or
more appliances
> The central profile is provide with freezer and
wine cellar columns.
Plastic covering frames are provided
for closing gaps between the appliance
and the adjacent cabinets.
Operate as follows:
> Position the appliances in front of the
installation area, leaving enugh space to operate
at their back [ 1 ].
1
> Access the back of the appliances to mount
the joining brackets: fix one side of the top and
lower brackets to one of the appliances and
subsequently to the other [ 2 ].
www.smeg.com
Appliance
A
Click!
B