Before Operating - EZ Smart GCI8-I Guide D'utilisation

BEFORE OPERATING:

• Make sure to read the Important Safety Information before operating.
• To reduce the risk of injury to your eyes, never operate the blower unless wearing goggles or
properly fitted protective glasses with adequate top and side protection complying with ANSI Z
87.1 (or your applicable national standard).
• We recommend the use of sound barriers (ear plugs or ear mufflers) to protect your hearing.
• Good footing is very important. Do not wear sandals, flip-flops or go barefoot.
• Always check the blower to make sure there are no cracks or anything that will indicate a problem.
Never operate if it is damaged.
• In the event of an emergency, turn the unit off immediately.
• Do not wear loose clothing, scarves or neck chains or let long hair hang loose, since these can be
drawn into rotating parts of the blower and cause injury.
1
The unit comes installed with the standard
nozzle that is suitable for standard gutter
cleaning. However, also included is the Hose
Nozzle that will allow you to blow leaves
from around downspouts, in roof valleys
(where roofs connect), unusual gutter
hard-to-reach areas, etc.
To change a Nozzle, rotate counter-
clockwise 90° and lift off the Nozzle.
2
Insert the new Nozzle by aligning the tabs
with the base and then rotate clockwise
90°. Make sure it is securely inserted by
gently tugging on it.
Description of the Hose Nozzle is described
in step 8.
Operation
6