Important Safety Information - EZ Smart GCI8-I Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

When using this blower, basic precautions should always be followed, including the following:
1.
All the safety and operating instructions should be read before the product is operated. Follow all operating
instructions.
2.
The safety and operating instructions should be retained for future reference.
3.
Comply with all warnings on the product and in the operating instructions.
4.
Power Sources – This product should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supplied to your location, consult your video dealer or local power company.
For products intended to operate from battery power, or other sources, refer to the operating instructions.
5.
Attachments – Do not use attachments unless recommended by the product manufacturer as they may cause a hazard.
6.
Do not use blower near water – for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement, near a swimming pool and the like.
7.
Store blower indoors.
8.
Do not allow blower to be used as a toy. Keep children away.
9.
All visitors should be kept at a distance from the work area.
10. Do not put any object or fingers into the openings. Do not use with any opening blocked; keep free of anything that
may reduce air flow.
11. Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.
12. Do not use in areas where flammable or combustible liquids, such as gasoline, may be present.
13. Do not lend or rent the blower without the instruction manual. Be sure that anyone using it understands the
information contained in this manual.
14. To reduce the risk of injury and/or damage to property, never let your power tool run unattended. When it is not in use
(e.g. during a work break), shut it off and make sure that unauthorized persons do not use it.
15. Be alert – if you get tired, take a break. Tiredness may result in loss of control. Working with any power tool can be
strenuous. If you have any condition that might be aggravated by strenuous work, check with your doctor before
operating this blower.
16. Protect the AC Adapter from rain and dampness. Keep charger dry.
17. The AC Adapter heats up during the charging process. Do not operate on an easily combustible surface (e.g. paper,
textiles) or in an easily combustible environment – risk of fire.
18. Do not operate in a hazardous location, i.e. in a location where there are combustible liquids (fumes), vapors or dusts.
Chargers can produce sparks, which may ignite the dust or vapors – risk of explosion.
19. To reduce the risk of injury from loss of control, never work on a ladder, in a tree or any other insecure support.
20. Watch for hidden obstacles such as tree stumps, roots and ditches to avoid stumbling. For better footing, clear away
fallen branches, scrub and cuttings. Be extremely cautious when working on slopes or uneven ground.
21. Inhalation of certain dusts, especially organic dusts such as mold or pollen, can cause susceptible persons to have an
allergic or asthmatic reaction. Substantial or repeated inhalation of dust and other airborne contaminants, in particular
those with a smaller particle size, may cause respiratory or other illnesses. Control dust at the source where possible.
Use good work practices, such as operating the unit so that the wind or operating process directs any dust raised
by the power tool away from the operator. Follow the recommendations of EPA/OSHA/NIOSH and occupational and
trade associations with respect to dust ("particulate matter"). When the inhalation of dust cannot be substantially
controlled, i.e. kept at or near the ambient (background) level, the operator and any bystanders should wear a
respirator approved by NIOSH/MSHA for the type of dust encountered.
22. Never point the blower at anybody.
23. Do not attempt any maintenance or repair work not described in this user guide.

IMPORTANT SAFETY INFORMATION

2

Publicité

Table des Matières
loading

Table des Matières