Before First Use - Ninja BL450 Série Manuel Du Propriétaire

Before First Use

PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
WARNING: Never leave the appliance
unattended while in use.
CAUTION: Blades are sharp! Use extreme
caution when handling the Pro Extractor
Blades Assembly. Always hold them by the
™
base of the Pro Extractor Blades Assembly.
CAUTION: Do not blend hot liquids.
CAUTION: Never attempt to remove the cup
while the appliance is still running.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are
not intended to be used in the microwave.
Do not place the cup or the lid in the
microwave as it may result in damage to the
accessories.
12 1-877-646-5288
CAUTION: Pro Extractor Blades Assembly is
sharp, and removable, handle with care. When
handling the Pro Extractor Blades Assembly,
always hold it by the base.
1 Remove all packaging material and labels from the
appliance.
2 Wash the lids, cups and Pro Extractor Blades Assembly
in warm, soapy water with a soft cloth.
CAUTION: Handle the Pro Extractor Blades
Assembly with care when washing, as the blades
are very sharp.
3 Rinse and dry thoroughly.
4
Cups, lids and Pro Extractor Blades Assembly are all
dishwasher safe. It is recommended that the lids and
Pro Extractor Blades Assembly be placed on the top
rack. Ensure that the Pro Extractor Blades Assembly
are removed from the cups before placing in the
dishwasher.
5 Wipe the motor base clean with a damp cloth.
Use
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing. Failure to remove may cause the container to be damaged
or to shatter, which may cause personal injury.
CAUTION: Handle the Pro Extractor Blades
™
CAUTION: Do not blend hot liquids.
CAUTION: Do not use stainless steel cup accessory model XSKDWSS24 with blender.
IMPORTANT: Make sure that the motor base is plugged in for use
ASSEMBLY
Fig. 1 Fig. 2
For best results, use short "PULSES"!
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2
Add ingredients to the cup.
3
Place the Pro Extractor Blades Assembly onto the cup
and twist it on tightly until you have a good seal. (Fig.
1)
4
Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, the unit is ready for use.(Fig. 2)
5 Press down on the top of the cup in short intervals to
activate. (Fig. 3)
6 When you have reached your desired consistency,
stop the appliance by removing your hand from the
cup. Wait for the motor to stop running. Then turn the
cup counterclockwise (Fig. 4) and pull straight up to
remove. (Fig. 5)
Assembly with care, as the blades are very sharp.
PULSE REMOVAL
Fig. 3 Fig. 4 Fig. 5
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max" fill line.
7
Turn the cup upright and remove the Pro Extractor
Blades Assembly by twisting the Pro Extractor Blades
Assembly counterclockwise. Be sure to store the Pro
Extractor Blades Assembly attached to an empty cup
when not in use.
8
Place the Sip & Seal ® lid onto the cup, twist to seal and
enjoy!
9 Make sure that the motor base is unplugged when not
in use.
www.ninjakitchen.com 13