Cleaning And Maintenance; Technical Information - Bestron AFS9003 Mode D'emploi

Slicer
Masquer les pouces Voir aussi pour AFS9003:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
instruction manual
Never use the food slicer without the food pusher.
Keep children away from the appliance when it is in use or ready for use.
When you are not using the appliance turn the on/off switch to position 0.

cleAning And mAintenAnce

Clean the food slicer after each use.
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
Do not immerse the motor unit in water, or in other liquids.
The knife is extremely sharp. Always hold the knife by the button in the middle. When necessary, use
your other hand to hold the plastic parts on the inner side of the knife. Make sure your hands are not
slippery from washing-up liquid or food, etc.; if necessary, wash your hands before handling the knife.
The knife is very sharp; to avoid injuries please observe the following instructions.
1. Set the on/off switch to '0' and remove the plug from the wall socket.
2. Hold the food slicer's housing firmly with your left hand. Remove the knife by turning the mounting
screw, in the center of the knife, clockwise. Remove the knife for the food slicer.
3. Wash the food tray, food pusher, thickness plate and knife in hot washing-up water. (These parts can
also be cleaned in a dishwasher).
4. Clean the motor housing and other parts of the food slicer with a clean cloth moistened with a
disinfectant cleaner, and dry thoroughly.
The knife is very sharp. Take extreme care when carrying out the following steps. Make sure the knife
cannot slip out of your hands.
5. Fit the knife to the food slicer. Secure the interlock by turning the button anticlockwise.
6. Wrap the power cord around the base of the appliance and put the food slicer, food tray and food
pusher into a resealable plastic bag.

tecHnicAl informAtion

Type:
AFS9003
Output:
150W
Power supply:
230V ~50 Hz
tHe enVironment
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to
the symbols on the product, the user's instructions or the packaging.
The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
Contact your municipality for the address of the appropriate collection point in your neighbourhood.
17

Publicité

Table des Matières
loading

Table des Matières