AutoAqua SMART ATO SATO-100P Mode D'emploi page 5

English
Notice
1. Please read the manual in detail before installation
2. Keep the power adapter dry and away from water to avoid any safety issues.
3. Please clean the sensor every 6 months to prevent non-fill issue.
4. Avoid installing controller in an area with micro bubbles or direct lighting.
5. The "Water Tube Output" must be higher than the "Normal Level" in the Tank/Sump and
"High Level" in the reservoir to avoid a siphon issue.
Water tube output
Normal level
High level
DC Refill Pump
Reservoir Tank/Sump
Holder Exchange Procedure (Rimless Tank Rimed Tank)
4