Sauder River Ranch 430049 Instructions D'assemblage page 14

Step 10
å
Carefully turn your unit over onto its front edges. Lay the PAPER
BACK (L) over your unit.
å
Turn five BLACK 9/16" EURO SCREWS (62S) into the bottom
edge of the PAPER BACK (L) and into the BACK (E). Do not
completely tighten the SCREWS at this time.
å
Then, making sure that the top edge of the PAPER BACK (L) sits
slightly below the top edge of your unit, fasten the top and side
edges of the PAPER BACK to your unit using the NAILS (1N).
å
Now, completely tighten the SCREWS in the bottom edge of the
PAPER BACK (L).
Page 14
62S
BLACK 9/16" EURO SCREW
(5 used in this step)
E
430049
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
NAIL
(20 used in this step)
L
www.sauder.com/service
8
1N