Telefunken L32F275U3C Mode D'emploi page 50

1. Nero Media Home Installation
The DLNA function cannot be used if the server
programme is not installed onto your PC. Please
prepare your PC with the provided Nero Media
Home programme. For more information about the
installation, please refer to the "Nero Media Home
Installation" section.
2. Connect to a Wired or Wireless Network
See the chapter Network Settings for detailed
configuration information.
3. Play Shared Files via Media Browser
Select Media Browser by using the Left or Right
buttons from the main menu and press OK. The Media
browser will then be displayed.
DLNA
DLNA support is only available in the Media Browser
folder mode. To enable folder mode, go to the Settings
tab in the main media browser screen and press OK. In
the settings options, highlight View Style and change to
Folder using the Left or Right buttons. Select the desired
media type and press OK.
If sharing configurations are set properly, Device
Selection screen will be displayed after selecting the
desired media type. Select the desired one and press
OK to display the content of the selected network or
USB memory. If you want to refresh the device list,
press the Green button. You can press Menu to exit.
If available networks are found, they will be listed on
this screen. Select media server or network that you
want to connect to using the Up or Down buttons and
press OK.
If you select the media type as Videos and choose a
device from the selection menu, a new menu screen
will appear on the screen
Select Videos from this screen again to list all the
available video files from the selected network.
To play other media types from this screen, you must
go back to main Media Browser screen and select the
media type as desired and then perform the network
selection again. Refer to the Media Browser Menu
section for further information on file playback.
Subtitle files do not work if you watch videos from your
network through DLNA.
You can connect only one television with DLNA to
the same network. If a problem occurs with the DLNA
network, please switch your television off at the wall
socket and back on again. Trick mode and jump are
not supported with the DLNA function.
Note: There may be some PC's which may not be able
to utilize the DLNA function due to administrator and
security settings (such as business PC's).
For best home network streaming with this TV, the
supplied Nero software should be installed.
All manuals and user guides at all-guidesbox.com
.
English - 49 -
Nero MediaHome Installation
To install Nero MediaHome, please proceed as
follows:
Note: To use DLNA function, this software should be installed
to your PC.
1. Enter the link below completely in the adress-
bar of your web browser.
http://www.nero.com/mediahome-tv
2. Click the Download button on the opening
page. The installation file will be downloaded
onto your PC.
3. After the download is completed, double click
on the installation file to start the installation.
The installation wizard will guide you through
the installation process.
WIRELESS DISPLAY
Wireless Display is a standard for streaming video and
sound content by Wi-Fi Alliance. This feature provides
the ability to use your TV as wireless display device.
Using with mobile devices
There are different standards which enable sharing of
screens including graphical, video and audio content
between your mobile device and TV.
Plug the wireless USB dongle to TV first, if the TV
doesn't have internal WiFi feature.
Then press the Source button on the remote and
switch to Wireless Display source.
A screen appears stating that the TV is ready for
connection.
Open the sharing application on your mobile device.
These applications are named differently for each
brand, please refer to the instruction manual of your
mobile device for detailed information.
Scan for devices. After you select your TV and
connect, the screen of your device will be displayed
on your TV.
Note: This feature can be used only if the mobile
device supports this feature. Scanning and connecting
processes differ according to the programme you
use. Android based mobile devices should have the
software version V4.2 and above.