Device Description - Advanced Diagnostics Silca Smart Remote Programmer Mode D'emploi

SMART Remote Programmer
The Smart Remote Programmer has an external user interface provided by a PC, Smartphone or
tablet application that allows the user to complete the functions.
WORKING PARTS SEE PAGG. 2 3
A - USB port for PC connec on
B - Remote key reading / prese ng area
C - Reference "Made in"
D - Red LED (Power LED)
E - Blue LED (Bluetooth LED)
F - On/off bu on (func ons only if used with
ba eries )
G - Reset bu on
FUNCTIONS:
- Iden fi es types and frequencies of vehicle key remotes
- Reads the frequency of the key remote control (frequency meter).
- Preset remotes via NFC using PC or smartphone or tablet
TECHNICAL DATA
Power supply
The device is powered via the USB cable connec on or with 4 alkaline batteries type AA
Input Voltage : 6V
Input power : 0.9W
Input current : 150mA
Antenna field frequencies
NFC ANTENNA 13,56 MHz
Bluetooth antenna 2,45 GHZ
Environment conditions
The SMART Remote Programmer will operate at ambient temperatures from 0 to +50°C
Dimensions
Width 84 mm
Length 145 mm
Depth 30 mm
Weight
181 gr
6

DEVICE DESCRIPTION

H - Ba ery housing
I - Serial Number
L - USB cable (provided)
M - Alkaline AA 1.5 Volt non-rechargeable ba eries
(4 provided)
N - Smart Remote Programmer ID label
O - Rubber grip
Copyright Silca S.p.A 2017
English