Publicité
Les langues disponibles
Les langues disponibles
•
The multifunction knob at the front of the right TWO
turning function. This knob controls the basic functions of your TWO
1. ON and manually OFF: a short push powers ON the device, manually OFF can be
forced by a longer push (>2s) on the knob.
If manually set OFF a static red LED will confirm this.
In case of automatic standby, this will be visible through a slowly blinking red LED.
2. VOLUME control: if the device is ON, by turning the knob, the volume can be increased
or decreased.
After switching OFF and ON, the previous volume setting is recovered.
3. Sequencial input selection (short push on the knob when the device is ON):
Input
LINE 1
LINE 2
Bluetooth
Digital optical
Digital USB
Before mains connections, check your mains power system to be appropriate to the
•
TWO
/
. The mains voltage (230V or 115V) of your power system you can set by the
NEO
PRO
VOLTAGE SELECTOR of your TWO
the actual setting of the mains voltage easily. Attention: if the mains voltage is set wrong, the
device may become defective! Always set the correct mains voltage to avoid defects!
•
Connect the mains cable to the mains input socket and the wall socket plug connect to your
mains supply.
Switch on the main switch on the back.
•
•
ON/STANDBY, source selection as well as volume you can control with the multifunction
knob on the front of the right speaker box of your TWO
The same and further settings like BASS, TREBLE, DEFEAT, LOUDNESS, and MUTING
•
can be controlled by the infrared (IR) remote control.
Note: If you emphasize the bass control too much, the maximum total volume will be limited
since the woofer may run at overstroke earlier. Please care not to overstroke the woofer too
much (audible distortions) since this can reduce the life-span of the woofers!
Socket
Phono Socket
3.5mm stereo
RCA L, R
-
S/P-DIF TOSLINK
USB-B
English
/
NEO
PRO
Indication Colour
green
white
blue
orange
purple
/
(beside the POWER switch) and you can verify
NEO
PRO
NEO
16
speaker box offers push and
/
:
NEO
PRO
Signal Source, Format
Smartphone, MP3-Player,
lower level, apprx. 500mV
PC, stationary HiFi
standard level max. 2000mV
Bluetooth Audio A2DP
PCM max. 24 Bit / 192 kHz
PCM max 24 Bit / 96 kHz
/
Sound System.
PRO
Publicité
