Brief Introduction - Sinmag Europe SM100C Mode D'emploi

1. BRIEF INTRODUCTION

The planetary mixers are produced to mix liquid ingredients, paste and viscid
ingredients, and dough.
Owners and operators should carefully read and familiarize themselves with
this entire manual before attempting to operate or service this machine. Com-
plying with this manual will ensure years of safe and trouble-free operation.
All of the information, illustrations and specifications contained in this manual
are based on the latest product information available at the time of printing.
Sinmag reserves the right to make changes at any time without notice. If
questions arise during the operation or servicing, please contact us before
proceeding.
2. INSTALLATION
After uncrating your planetary mixer, inspect the machine for any damage that
might have occurred during shipment. Report any damage to us before pro-
ceeding to operate this machine. Never attempt to operate this machine with
damaged or inoperable parts.
The following accessories are packed in the machine: One Dough Hook, One
Beater, One Whipping Ball.
Select a location for your mixer to allow sufficient room for operating, cleaning
and servicing the machine. The floor must be solid and level.
3. COMMISSIONING
Check available voltage to your mixer. This mixer should have its own, isola-
ted electrical supply. Check your machine's identification/ electrical plate to
determine the appropriate breaker and wire size needed.
To ensure safety and years of trouble-free operation, the manufacturer recom-
mends that a licensed electrician check the electrical supply to ensure that the
proper breaker and wiring is being used.
After the machine has been connected to the electric supply, first of all check
the direction of rotation of agitator. From above, the agitator should rotate
SINMAG EUROPE BVBA
ENG
3