BENOIT SYSTEMS Mini Minotor 2.1 Mode D'emploi page 33

• Repeat the test a further three times, pushing the joystick gently back, left and right.
• Activate all the electrical options, including the audible warning, to confirm they are working
correctly.
• Use the vehicle in all driving modes to confirm that it operates as before.
CAUTION
If in doubt about the performance of your vehicle, contact your approved dealer.
It is recommended that the items shown in the table are inspected at the stated intervals.
Your approved dealer should repair or replace loose, worn, distorted or damaged parts before using your
vehicle.
Servicing and inspection programme
Check the battery charge indicator and the charger
Check that the joystick on the control unit is neither distorted nor
damaged
Check that all the parts and devices are firmly attached
Test the braking system
Inspect the condition of the tyres and wheel fastenings
Check that the cables and connectors are in good condition, are not
tangled and are not in the way.
Inspect the condition of the seat you use
Inspect all the bolts, nuts and fastenings to confirm they are not
damaged or loose.
Check that the battery terminals are tightened
Perform a full inspection, safety check and service
by a Benoit Systemes approved dealer
* Every day, before each use
Correct servicing will improve your vehicle's performance and extend its service life, as well as reducing
the risk of an accident.
WASTE MANAGEMENT
• The equipment's packaging goes to recycled materials.
• The metal parts go to old metal recycling.
• The plastic parts go to plastic recycling.
• The electrical parts and printed circuits go to electronic waste.
• Worn out or damaged batteries are taken back by your medical equipment shop or by Benoit Systemes.
• Waste should be managed in accordance with the appropriate national legal requirements in force.
• Ask your local authority for information about suitable local firms.
SERVICING & MAINTENANCE MANUAL
33
Daily* Monthly Quarterly
EN
Annually