ATOMSTACK IKIER C1 Manuel D'utilisation page 3

1 Declaration
IKIER C1 camera functions need to be controlled by LightBurn, please download the official version of LightBurn software. LightBurn is a
third-party software, so IKIER service is not responsible for any loss caused by the operation of LightBurn, the firmware of IKIER has been
tested in detail by IKIER, and the situation of incompatibility with software or hardware is still possible occur. If an error occurs due to
incompatibility, you can contact our customer department service for technical support.
support@atomstack.net, support@ikier.com
2 Precautions
1. Do not collide or move the camera during the calibration process.
2. Do not collide or move the camera after the alignment of the calibration camera is completed. If the camera is collided and the camera
is shifted left and right, the camera lens and camera alignment need to be recalibrated.
3. Cardboard and dot cards need to be flat.
2