Ferroli MD-CCM09 Manuel D'installation Et D'utilisation page 55

5. Press
heat mode, press
Press
high speed
Press
period 1 to the next step
6. Finish the weekly timer parameter setting of the air conditioner within period 1 of the day of the week.
7. Continually set periods 2, 3, 4 according to the above operation.
8. After finishing the setting of the periods, continually select the day of the week needed to be set, to set the weekly timer
parameter from Monday to Sunday, seven days in total.
EN
to select running mode: automatic, cool, heat, Fan-only, Dry, or Off. If you select the cool, automatic or
to adjust the temperature (the scope is within 17 - 30 degree).
to regulate Fan speed, which can be selected among automatic speed, low Speed, middle speed and
to save the parameter of the
Finish setting
Press to cancel the set of period 1
and return to the last step.
Cod. 3QE46680 - Rev. 00 - 01/2021
Fig.8-6.2
Owner's & Installation manual
21