Ferroli MD-CCM09 Manuel D'installation Et D'utilisation page 52

8.2 How to query the running status of the air conditioner?
1. Press
Press
2. Press
8.3 How to lock and unlock the remote controller of the air conditioner?
1. Press
press the button repeatedly to select "Single" and "All" alternately, displaying
"Set". If you select "Single", press
2. Selecting "All" indicates to set the running status of all air conditioners,
and "All" is displayed. Selecting "Single" displays the address of the air
conditioner; for example, if the air conditioner whose address is 12 is
selected, "12 # " is displayed.
3. Press
the corresponding air conditioner and finish setting.
Owner's & Installation manual
18
Under the main interface
to enter the query status of single air conditioner, displaying "Query";
to select one air conditioner.
to view more parameters of the air conditioner.
Under the main interface
Set to enter the setting status interface of single air conditioner,
to send the lock or unlock command of the remote controller to
Cod. 3QE46680 - Rev. 00 - 01/2021
to select one.
Fig.8-2
Fig.8-3
EN